Epoxy resin floor for marine
Epoxy Resin for the Marine sector
DECK COATINGS / FLOORINGS
The system Flexisecurit ER consists of a two component high-build, self-levelling compound to apply by spatula.
Screed made of epoxy resin and inert quartz filler.
APILITE U 070
Apilite U070 is a three-component product, based on epoxy resins, used to make low-weight underlays. Apilite U070 kit is composed by: Apilite U070 Base, Apilite U070 Hardener, Apilite U070 Filler. Apilite U070 provides with corrosion resistance to metal surfaces thanks to extreme adhesion and to the creation of a waterproof layer.
Flexiplast ht is an IMO-certified underlay for high thickness, heavy-duty, indoor floors. With an average weight of 1 kg/l and the ability to reach very high thicknesses up to 50 mm or more, it is the ideal underlay for most heavy duty indoor areas in a ship, whenever high thicknesses are required. It can be finished with resin topcoat (e.g. Flexisecurit er), tiles, etc.
Flexiplast LT is an epoxy based and hydraulic-binder based product used to make low and medium thickness underlays.
Hybrid high specific weight self-levelling water-epoxy resin based underlay. Self-levelling underlay with high specific weight for impact noise abatement.
Sealing layer for Flexiplast HT/LT/HW. Flexiplast SL is a water based epoxy resin with modified hydraulic binders used as sealing layer for underlays of Flexiplast cycle.
PLASTIGEL PER STRATIFICAZIONE
Multi-Layer Plastigel for propeller-shaft coating. Two component epoxy solventless impregnating system, based on epoxy fluid resins, suitable for the impregnation of glass fiber cloth and the formation of multi-layer fiberglass protective coatings provided with exceptional mechanical properties. Plastigel Per Stratificazione is designed for propeller-shafts and it possesses rheologic properties specially formulated for this use. The cured coating system will protect propellershafts from corrosion and cavitation phenomena and will be highly resistant to shocks, as well as proof against sea water corrosion and marine fouling.
Protecting coating for double bottoms ballast tanks, resistant to sea water and industrial water.
Two-component product with low solvent content, that rapidly dries up, based on epoxy modified resins. It is used for non-corrosive high thickness flexible coatings. It has a high elasticity and impact resistance. It has an excellent adhesion capacity on all types of substrates. It is applied in two layers, alone or as a part of a protective coating, of which it is a fundamental part.
PLASTIGEL PER PISCINE
Epoxy-based liquid cover for steel pools. Plastigel Per Piscine is a lining based on liquid modified epoxy resins: it is suitable for use on iron or concrete swimming pools, containing either fresh or sea water. Plastigel Per Piscine is flexible, yet it’s surface is hard, smooth, with a nearly glassy appearance, easy to clean. Possible defects can be easily repaired since it is overcoatable after prolonged periods. Compared to the traditional system used, that is tiles or small mosaic tiles, Plastigel Per Piscine offers the advantage of being seamless and therefore perfectly waterproof.
Two-component protective product based on liquid modified epoxy resins. When cured, it is hard, tough, resistant and easy to clean. Suitable for the lining of steel or concrete tank containing for various chemical product.
Two-component finishing coat based on epoxy resins in aqueous emulsion Apitop Epo is a two-component product, based on epoxy resins in aqueous emulsion, used to protect floors against chemicals; it dustproofs surfaces, giving enough strength to resist dense pedestrian traffic and light wheeled traffic. Apitop Epo is also available as Apitop Epo C, with antislip properties. For professional use only.
PRIMER POLIETO SP
Primer Polieto SP is used as a shop primer or for general protection of surfaces immediately after preparation, when surface extension or in case of limited air conditioning possibilities prevent the direct application of API cycles Flexigel, Thioplast, Plastigel Atossico, Plastigel per Piscine, Epolastic, Plastigel per Stratificazione. Use of Primer Polieto SP must always be pre-emptively agreed with API Technical Department.
Adhesion promoter. Impregnating agent for marine underlay based on cement, to be top coated with FLEXISECURIT ER. A two component product based on thinned, modified epoxy resins
Adhesion promoter for Flexiplast cycle. Adhesion promoter based on epoxy resins and hydraulic binder.
STUCCO K / STUCCO K RAPIDO
A two-component, solvent free, thixotropic epoxy product. It is supplied also in fast type. Easy to apply, epoxy filler suitable for small application on base materials with limited tensile/shearing strength (eg. solid concrete not for plaster). Also used to eliminate unevenness on steel or light alloy surfaces.